NOW 134496 SKU's Available at MutualScrew.com

Call Toll Free

1-800-222-0324
Cart
1-800-222-0324

1/4-20 Steel Drop-In Anchors

Steel Drop-In Anchors

1/4" Drop In Anchor

One Setting tool Included

 
 

 

  • Mutual Screw & Supply
    Since 1947
  • SKU: 14ADR Product Size: 1/4-20 Weight: 2 lbs Condition: New
  • $14.43 for 100 pieces
    That's only $0.1443 per piece
  • of 100 pieces
  • Buy Bulk and Save.
    Buy Price
    $147.21 for 1200 pieces ( 24 lbs ) That's only $0.1227 per piece
    You save $25.98

    Need more than 1200? Get a Volume Pricing Quote


    Our quotation request form is currently being updated. Please fax quotation requests to 201-845-5784 or call 1-800-222-0324 and ask for a customer service representative.
Customer Email Window
Thanks
Product Detailed Description

1/4-20 Steel Drop-In Anchors

This 1/4" drop in anchor usually ships within 24 hours.

  • 3/8" Hole Diameter
  • 1/2" Thread Length
  • 1" Minimum Embedment
  • One setting tool per box
  • Ultimate Tensile (lbs.) 2067
  • Ultimate Shear (lbs) 1321
  • FF-S325 Group VIII, Type 1
Description
A two-piece, internally threaded expansion anchor with four equally-spaced longitudinal slots extending from the bottom end of the outer shield, inside of which sits a pre-assembled dilating plug. The bottom lip of the anchor is tapered. It is permissible for a section of the shield to be knurled, to increase the gripping action of the anchor

Applications/ Advantages
Intended for flush mounted, medium to heavy-duty applications in solid materials such as stone and concrete. It can be used in, but are
not limited to, overhead assemblies such as duct work and pipe hangers because the internal plug holds its position. Can also be used to anchor handrails and floor-mounted door stops

Material
Anchor body: AISI 12L14 cold rolled steel
Expander Plug: AISI 12L14/1215 cold rolled steel, case-hardened and tempered
Anchor body: 303 Stainless steel Expander
Plug:
303 Stainless steel

Anchor Spacing
Anchors should be installed a minimum of ten anchor diameters between each other and a minimum of five anchor diameters from the edge

Depth of Hole
Should be at least equal to the length of the anchor

Tensile and Shear Strengths
The suggested safe working load is one-fourth the average proof test loads shown in the above table
 

 

Related Products
1/4 Drop-In Anchor Setting Tools
1/4 Drop-In Anchor Setting Tools

$3.91
Have questions or need more information about our 'Steel Drop-In Anchors', please contact us?