NOW 139316 SKU's Available at MutualScrew.com

Call Toll Free

1-800-222-0324
Cart
1-800-222-0324

1/4 x 1 1/2 Two Piece Nylon Anchor Rivet Truss Head Grey Nylon Plastic Pin

Two Piece Nylon Anchor Rivet Truss Head Grey Nylon Plastic Pin

  • Mutual Screw & Supply
    Since 1947
  • SKU: 141500PTPGYKC Product Size: 1/4 x 1 1/2 Weight: 4 lbs Condition: New
  • $594.38 for Pack of 1000 pieces
    That's only $0.5944 per piece
  • Currently Available:
    New Jersey: 0
    Illinois: 7000
    California: 0
    We will ship from the Closest Warehouse
  • of 1000 pieces

Looking for a different Nylon Anchor Rivet Truss Head Grey Nylon Plastic Pin product?
Select from our full selection of Nylon Anchor Rivet Truss Head Grey Nylon Plastic Pin HERE

Product Detailed Description

1/4 X 1-1/2 Two Piece Nylon Anchor Rivet Truss Head Grey Nylon Plastic Pin

  • 1/4" Diameter
  • 1 1/2" Length from under the head
  • 1 3/4" Minimum hole depth
Description 
A fastening system which consists of two parts: (1) a nylon piece similar in design to a blind rivet which has a cylindrical shank split on two sides, 180° apart, extending from the bottom of the shank up most of the distance to the head. The shank has several ribs extending completely around its circumference. Mushroom, pan and flat head styles are available; (2) a plastic pin expander which passes through a concentric channel extending from an opening in the top of the head of the nylon piece down into the shank to a point just below the spot where the split ends below the head. The pin has a slot across the top of its head, a chiseled point similar to a nail, and threads on its own shank which helps to lock the anchor in place upon installation

Applications/ Advantages 
Installation is achieved by inserting the end of the nylon shank into a pre-drilled hole and hammering the head of the nail until it meets the head of the anchor body. Driving the nail through the body expands the split ends which allows the ribs to grip the wall of the prepared hole. This is a light duty anchor for use in solid materials such as concrete, brick and block, preferred when fixtures must be attached without chipping the fixture or the masonry. Can also be used like a toggle bolt in wallboard or plaster, or as a blind rivet in joining several thicknesses of material together, especially in applications subject to vibration. The nylon withstands temperatures from -40°F to 170°F

Material  Body
Injection molded thermoplastic nylon Expander

This Mutual Screw & Supply 141500PTPGYKC Nylon Anchor Rivet Truss Head Grey Nylon Plastic Pin typically ships within 24 to 48 hours

Have questions or need more information about our 'Two Piece Nylon Anchor Rivet Truss Head Grey Nylon Plastic Pin', please contact us?