Call Toll Free
Phosphate Coated Carbon spring steel SAE 1060-1090 Hardness Sizes 25 & 46: Rockwell 30N 69.5-73 Sizes 50 - 81: Rockwell 30N 66-71 Sizes 87 - 102: Rockwell C47-53 Sizes 106 - 343: Rockwell C47-52 A ring-shaped stamping with one opening on the circumference. The two ends at the opening are called lugs and flare slightly allowing for easier installation onto shafts. Tapered section design assures constant moment and, therefore, uniform circular deformation; allows for complete contact and tightness in groove. The external design is for axial installation into machined grooves on shafts. Steel rings can be safely used within a temperature range of -100°F to 500°F. Retaining rings are heat treated using the austempering method. Rings are uniformly heated to temperatures over 1500°F. They are then isothermally quenched in a molten salt bath at 600°F for 35 minutes. This results in parts with a bainite structure characterized by good mechanical properties. MutualScrew.com has the largest selection of BOLTS, NUTS, SCREWS and WASHERS on the internet
This Mutual Screw & Supply 02695SF Retaining (Snap) & E Ring Kits
typically ships within 24 to 48 hours
For benefits, discount & notice ...