NOW 149901 SKU's Available at

Call Toll Free


6/32 X 1/4 Low Head Alloy Steel Socket Cap Screws

  • Mutual Screw & Supply
    Since 1947
  • SKU: 0604CSPL Product Size: 6/32 X 1/4 Weight: 1 lb Condition: New
  • $39.33 for Pack of 100 pieces
    That's only $0.3933 per piece
  • of 100 pieces
  • You pay $37.36 if you buy 5 Packs or more.
    That's only $0.3736 per piece
Product Detailed Description

6/32 X 1/4 Low Head Alloy Steel Socket Cap Screws
  • Description: Similar to a standard alloy socket cap screw except the head height is 50% of the standard's and the socket size is smaller.
  • Applications/Advantages: Used in applications where the limited clearance would not accomodate the head height of a standard socket cap screw. Also used in counterbored holes of material too thin for a regular socket cap screw. However, because of their design, they cannot withstand the same preloads as a standard socket head.
  • Material: Cap screws shall be made from an alloy steel which conforms to the following chemical composition requirements (per product analysis)-- Carbon: 0.31% minimum; Phosphorus: 0.040% maximum; Sulfur: 0.045% maximum. Also, one or more of the following elements shall be present in sufficient quantity to meet the performance requirements listed below: chromium, nickel, molybdenum or vanadium.
  • Heat Treatment: Cap screws shall be heat treated by oil quenching from above the transformation temperature and then tempered at a temperature not lower than 650 °F.
  • Hardness: Rockwell C38 minimum
  • Tensile Strength: 170,000 psi. minimum
  • Yield Strength: 150,000 psi. minimum
  • Elongation: 10% minimum (applies to machined specimens of length at least 4D where D equals the nominal diameter of the screw.
  • Reduction of Area: 33% minimum (applies to machined specimens)

This Mutual Screw & Supply 0604CSPL Low Head Alloy Steel Socket Cap Screws typically ships within 24 to 48 hours

Have questions or need more information about our 'Low Head Alloy Steel Socket Cap Screws', please contact us?