Starrett Height Transfer Gage 0-4" (0-350mm)
Starrett Height Transfer Gage 0-4" (0-350mm)
Product Detailed Description
Starrett Height Transfer Gage 0-4" (0-350mm)
The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards. 0-14” (350mm) Range.
FEATURES
Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
Hand-fitting base design for sure-grip handling and easy movement
Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
Thumb screw allows slide to be locked
Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
A snug on the slide provides two holes (.375" [9.5mm] and .156" [4mm]) for holding gage rods or scribers
The rod has a major diameter of .375" (9.5mm) and stepped diameters of 1/4" (3.2mm) and 7/32" (5.5mm) at one end and 5/16" (8mm) at the opposite end.
Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod
SPECIFICATIONS
Type: Height Transfer Gage
: Base Size (Approximate) 5-3/4" L x 3-1/2" W (145mm x 90mm)
Range (in): 0-14"
Range (mm): 0-350mm
This Starrett 252Z-14 typically ships within 24 to 48 hours
Have questions or need more information about our 'Starrett Height Transfer Gage 0-4" (0-350mm)', please contact us? |