NOW 139310 SKU's Available at

Call Toll Free


18 Items 210 Pieces Plastic Case Alloy Steel Dowel Pin Kit

Alloy Steel Dowel Pin Kit

    Assortment Sizes

  • 1/16" x 3/8"
  • 1/16" x 1/2"
  • 1/16" x 3/4"
  • 3/32" x 3/8"
  • 3/32" x 1/2"
  • 3/32" x 3/4"
  • 1/8" x 1/2"
  • 1/8" x 3/4"
  • 1/8" x 1"
  • 3/16" x 3/4"
  • 3/16" x 1"
  • 1/4" x 3/4"
  • 1/4" x 1"
  • 5/16" x 3/4"
  • 5/16" x 1"
  • 3/8" x 1/2"
  • 3/8" x 3/4"
  • 3/8" x 1"
  • Mutual Screw & Supply
    Since 1947
  • SKU: 02610SF Product Size: 18 Items 210 Pieces Plastic Case Weight: 4 lbs Condition: New
  • $74.73 for 1 piece

Looking for a different Pin Kits product?
Select from our full selection of Pin Kits HERE

Product Detailed Description

Alloy Steel Dowel Pin Kit

Plastic Case Measurements: 11" Wide X 6-3/4" Deep X 1-3/4" Height

  A solid headless straight pin with a closely controlled diameter.  One end is chamfered with the other end radiused to form a crown.

  Wide variety of uses, including as a plug gage, hinge or shaft.  Precise tolerances of dowel pins make them excellent for achieving proper alignment of parts in high-speed assemblies, or as roller bearing in bus/truck wheel housing. 

  Important Note: Dowel pins should be installed by being pressed in, not struct with an impact force.

  Pins shall be made from any alloy steel capable of achieving the proper hardness requirements listed herein, having sulfar content of 0.05% maximum, and phosphorus content of 0.04% maximum.

  Pins shall be hardened by quenching in oil from austenitizing temperature and tempering to meet the proper Rockwell hardness and case depth.

  Core Hardness:  Rockwell C47-58
  Case Hardness:  Rockwell C60 minimum
  Case Depth:  1/8 diameter: 0.010 in. minium.
                        3/16 diameter and larger: 0.015 in. minimum.

  Shear Strength:  Hardened ground machine dowel pins shall have a single
                             shear strength of 130,000 psi minimum.  They shall be capable
                             of withstanding the double shear loads specified.

  Ductility: Hardened ground machine dowel pins shall have sufficient ductility to withstand being pressed into holes 0.0005 in. smaller than the nominal pin diameter in hardened steel without cracking or shattering. has the largest selection of BOLTS, NUTS, SCREWS and WASHERS on the internet

96% of our orders ship same day!





This Mutual Screw & Supply 02610SF Dowel Pin Kits typically ships within 24 to 48 hours

Have questions or need more information about our 'Alloy Steel Dowel Pin Kit', please contact us?