12 Items 175 Pieces Plastic Case E-Type Retaining Rings Stainless Steel Kit

 

 Assortment Sizes

• 1/8"
• 5/32"
• 3/16"
• 7/32"
• 1/4"
• 5/16"
• 3/8"
• 7/16"
• 1/2"
• 5/8"
• 3/4"
• 7/8"

Looking for a different Snap & E Ring Kits product?
Select from our full selection of Snap & E Ring Kits HERE

E-Type Retaining Rings PH 15-7 Stainless Steel Kit

  Plastic Case Measurements: 11" Wide X 6-3/4" Deep X 1-3/4" Height

  Precipitation Hardened Alloy 15% Chromium, 7% Nickel, 2% Molybdenum

  Hardness Size 6:                  Rockwell 15N 82.5-86
                   (Hardness cannot be checked with any degree of accuracy on  this size)
                   Size 9-S14:         Rockwell 15N 82.5-86
                   Size 14-S31:       Rockwell 30N 63-69.5
                   Size 37 & over:    Rockwell C44-51

  Tensile Strength:     225,000 psi. minimum

  A semi-circular stamping with two ends which are set further apart than both internal and external rings.  The two ends have flared "prongs" which are substantially wider than the other parts of the ring.  A center prong extends from the inside perimeter of the ring, halfway between the two ends.  The three prongs, when radially installed, make contact with the bottom of the groove.

  Designed for radial (vertical) installation into machined grooves on shafts of varying diameter.  E-rings require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.  Steel rings can be safely used within a temperature range of - 100°F to 500°F.

  Retaining rings are heat treated using the austempering method.  Rings are uniformly heated to temperatures over 1500° F. They are then isothermally quenched in a molten salt bath at 600° F for 35 minutes.  This results in parts with a bainite structure characterized by good mechanical properties.

MutualScrew.com has the largest selection of BOLTS, NUTS, SCREWS and WASHERS on the internet

This Mutual Screw & Supply 06450SF Retaining (Snap) & E Ring Kits typically ships within 24 to 48 hours