12 Items 138 Pieces Plastic Case External Retaining Rings Stainless Steel Kit
Product Detailed Description
External Retaining Rings PH 15-7 Stainless Steel Type SH Kit
Plastic Case Measurements: 11" Wide X 6-3/4" Deep X 1-3/4" Height
Precipitation Hardened Alloy 15% Chromium, 7% Nickel, 2% Molybdenum
Hardness Sizes 25 - 31: Rockwell 30N 63-69.5
Sizes 87 & over: Rockwell C44-51
Tensile Strength: 225,000 psi. minimum
A ring-shaped stamping with one opening on the circumference. The two ends at the opening are called lugs and flare slightly allowing for easier installation onto shafts.
Tapered section design assures constant moment and, therefore, uniform circular deformation; allows for complete contact and tightness in groove. The external design is for axial installation into machined grooves on shafts. Steel rings can be safely used within a temperature range of -100°F to 500°F.
Retaining rings are heat treated using the austempering method. Rings are uniformly heated to temperatures over 1500°F. They are then isothermally quenched in a molten salt bath at 600°F for 35 minutes. This results in parts with a bainite structure characterized by good mechanical properties.
MutualScrew.com has the largest selection of BOLTS, NUTS, SCREWS and WASHERS on the internet
This Mutual Screw & Supply 06460SF Retaining (Snap) & E Ring Kits typically ships within 24 to 48 hours
|Have questions or need more information about our 'External Retaining Rings Stainless Steel Kit', please contact us?|