NOW 135536 SKU's Available at MutualScrew.com

Call Toll Free

1-800-222-0324
Cart
1-800-222-0324

18 Items 360 Pieces Plastic Case Internal & External Retaining Rings Stainless Steel Kit

Internal & External Retaining Rings Stainless Steel Kit

 

Assortment Sizes
  • 1/4" External
  • 5/16" External
  • 3/8" External
  • 7/16" External
  • 1/2" External & Internal
  • 9/16" External
  • 5/8" External & Internal
  • 11/16" Internal
  • 3/4" External & Internal
  • 13/16" Internal
  • 7/8" External & Internal
  • 1" Internal
  • 1-1/16" Internal
  • 1-1/8" Internal
  • Mutual Screw & Supply
    Since 1947
  • SKU: 06465SF Product Size: 18 Items 360 Pieces Plastic Case Weight: 1 lb Condition: New
  • $130.89 for 1 piece

Customer Email Window
Thanks
Product Detailed Description

Internal & External Retaining Rings PH 15-7 Stainless Steel Kit

  Plastic Case Measurements: 11" Wide X 6-3/4" Deep X 1-3/4" Height

Internal Retaining Ring
  Precipitation Hardened Alloy 15% Chromium, 7% Nickel, 2% Molybdenum

  Hardness Sizes 25 & 31: Rockwell 15N 82.5-86
                Sizes 37 - 102: Rockwell 30N 63-69.5
                Sizes 106 & over: Rockwell C44-51

  Tensile Strength:  225,000 psi. minimum

  A ring-shaped stamping with one opening on the circumference.  The two ends at the opening are called lugs and flare slightly into the groove.  When the lugs are released, contact is made with the grooved housing.

  Tapered section design assures constant moment and, therefore, uniform circular deformation; allows for complete contact and tightness in groove.  The internal design is for axial installation into machined grooves in housing and bores.  Steel rings can be safely used within a temperature range of -100°F to 500°F.

  Retaining rings are heat treated using the austempering method. Rings are uniformly heated to temperatures over 1500°F.  They are then isothermally quenched in a molten salt bath at 600°F for 35 minutes.  This results in parts with a bainite structure characterized by good mechanical properties.


External Retaining Ring
  Precipitation Hardened Alloy 15% Chromium, 7% Nickel, 2% Molybdenum

  Hardness Sizes 25 - 31: Rockwell 30N 63-69.5
                  Sizes 87 & over: Rockwell C44-51

  Tensile Strength:  225,000 psi. minimum

  A ring-shaped stamping with one opening on the circumference.  The two ends at the opening are called lugs and flare slightly allowing for easier installation onto shafts.

  Tapered section design assures constant moment and, therefore, uniform circular deformation; allows for complete contact and tightness in groove.  The external design is for axial installation into machined grooves on shafts.  Steel rings can be safely used within a temperature range of -100°F to 500°F.

  Retaining rings are heat treated using the austempering method. Rings are uniformly heated to temperatures over 1500°F.  They are then isothermally quenched in a molten salt bath at 600°F for 35 minutes.  This results in parts with a bainite structure characterized by good mechanical properties.


MutualScrew.com has the largest selection of BOLTS, NUTS, SCREWS and WASHERS on the internet

96% of our orders ship same day!

This Mutual Screw & Supply 06465SF Retaining (Snap) & E Ring Kits typically ships within 24 to 48 hours

Have questions or need more information about our 'Internal & External Retaining Rings Stainless Steel Kit', please contact us?