NOW 136969 SKU's Available at

Call Toll Free


5/8-11 Steel Drop-In Anchors

  • Mutual Screw & Supply
    Since 1947
  • SKU: 62ADR Product Size: 5/8-11 Weight: 8 lbs Condition: New
  • $23.12 for Pack of 25 pieces
    That's only $0.9247 per piece
  • of 25 pieces
  • You pay $21.96 if you buy 4 Packs or more.
    That's only $0.8785 per piece
Customer Email Window
Product Detailed Description

5/8-11 Steel Drop-In Anchors

  • 7/8" Hole Diameter
  • 1"- 1 3/16" Thread Length
  • 2 1/2" Minimum Embedment
  • One setting tool per box
  • Ultimate Tensile (lbs.) 5750
  • Ultimate Shear (lbs) 8754
  • FF-S325 Group VIII, Type 1
A two-piece, internally threaded expansion anchor with four equally-spaced longitudinal slots extending from the bottom end of the outer shield, inside of which sits a pre-assembled dilating plug. The bottom lip of the anchor is tapered. It is permissible for a section of the shield to be knurled, to increase the gripping action of the anchor

Applications/ Advantages
Intended for flush mounted, medium to heavy-duty applications in solid materials such as stone and concrete. It can be used in, but are
not limited to, overhead assemblies such as duct work and pipe hangers because the internal plug holds its position. Can also be used to anchor handrails and floor-mounted door stops

Anchor body: AISI 12L14 cold rolled steel
Expander Plug: AISI 12L14/1215 cold rolled steel, case-hardened and tempered
Anchor body: 303 Stainless steel Expander
303 Stainless steel

Anchor Spacing
Anchors should be installed a minimum of ten anchor diameters between each other and a minimum of five anchor diameters from the edge

Depth of Hole
Should be at least equal to the length of the anchor

Tensile and Shear Strengths
The suggested safe working load is one-fourth the average proof test loads shown in the above table


This Mutual Screw & Supply 62ADR Carbon Steel Drop-In Anchors by Mutual Screw typically ships within 24 to 48 hours

Related Products
5/8 Drop-In Anchor Setting Tools
5/8 Drop-In Anchor Setting Tools

Have questions or need more information about our 'Steel Drop-In Anchors', please contact us?